Prime Cost Calculator

Enter cost of goods sold, total labor and sales for the same week or month, and your own target if you have one. The formula, a worked example and the limits are below.

Prime cost calculator

Cost of goods sold.

Wages, payroll taxes and benefits.

Prime cost62.0% of sales$62,000. Within the 60 to 65% range for full-service restaurants
Food and beverage30.0%of sales
Labor32.0%of sales
How this is calculated
  • Prime cost = food and beverage cost + total labor cost
  • Prime cost % = prime cost ÷ total sales × 100
  • Gap to your target = prime cost − target % × sales

Benchmarks: 60 to 65% for full service, 55 to 60% for quick service (Restaurant365, How to Calculate Restaurant Prime Cost). Ranges vary by concept: a range, not a rule. Your own target and your trend matter more. If the food figure comes from a partial inventory count, treat the result as an estimate.

Use the same week or month for all three numbers. Example numbers to start: replace them with yours.

This prime cost calculator adds your food and beverage cost to your total labor cost and shows the total as a share of sales, next to a cited range for your service style. Enter your own target and it also shows how many dollars you were over or under it this period. It's part of our guide to reducing restaurant costs without hurting service.

For what counts on each side and why it matters, read what prime cost is and how to lower it. This page covers the calculator itself.

How to use the prime cost calculator

Pick Full service or Quick service at the top; that only changes the range your result is compared with. Then enter three numbers for the same period, a week or a month.

Input What it means Where to find your number
Food and beverage cost (cost of goods sold) What you used in the period, not what you bought: beginning inventory + purchases − ending inventory, for food and drink Your inventory counts and the period's invoices, net of vendor credits. The period tab of the food cost calculator works out the food side
Total labor cost Hourly wages and overtime, salaried managers and chefs, employer payroll taxes, workers' comp, health insurance and other benefits Your payroll register for the period, plus the employer tax and benefits lines from your payroll provider
Total sales Food and beverage sales for the same period, before sales tax and tips Your POS sales summary
Your target prime cost (optional) Your own goal, as a percentage of sales Your budget or your best recent periods

Match the period and the categories. All three numbers must cover the same dates. Mixing a month of labor with four weeks of sales throws the percentage off, and so does counting the labor on paychecks issued in the period rather than wages earned in it. If cost of goods includes beer, wine and spirits, sales must include them too, and the other way around.

Include the full payroll burden. Restaurant365 defines labor cost as "the total wages your employees have earned during that specific period of time, payroll taxes, benefits, and insurance." The taxes alone aren't small: per the IRS, the employer pays 6.2% of wages for Social Security and 1.45% for Medicare, before unemployment taxes and benefits. Enter wages only, and your prime cost looks better than it is.

A partial count gives an estimate. Purchases alone swing with delivery timing: a big order on the last day of the month inflates this month and flatters the next. If your weekly food figure comes from counting only high-cost items, treat the result as an estimate and reconcile it with a full count at least monthly. The food cost calculator explains how to estimate the items you didn't count.

Blank or negative costs, or sales of zero, are highlighted with a note, and the result stays hidden until you fix them.

How prime cost is calculated

Formula: Prime cost = food and beverage cost + total labor cost. Prime cost % = prime cost ÷ total sales × 100. Gap to your target = prime cost − target % × sales.

Worked example: The calculator opens with $30,000 of food and beverage cost, $32,000 of total labor and $100,000 of sales, set to full service with no target. Prime cost = $30,000 + $32,000 = $62,000. Prime cost % = $62,000 ÷ $100,000 × 100 = 62.0%, within Restaurant365's 60 to 65% range for full-service restaurants. Food and beverage is 30.0% of sales and labor is 32.0%.

Worked example (your target): Say your own target is 60%. On $100,000 of sales that's $60,000, so the calculator shows $62,000 − $60,000 = $2,000 over your target this period. At this volume, each point of prime cost is $1,000 a period.

With a target entered, the dollar gap appears next to the food and beverage and labor percentages, so you can see which side the gap comes from.

How to read the result

Which range applies to you. The calculator compares your result with Restaurant365's ranges: 60 to 65% of sales for full-service restaurants and 55 to 60% for quick-service. The same 62.0% is within range for one and above it for the other. For a sense of where operators land, the National Restaurant Association's 2025 data put the median limited-service operator's prime cost at 65 cents of every sales dollar. Treat any range as a check, not a rule; your own target and trend matter more.

If it's over your target, see which half moved, then compare with your own recent weeks.

  1. Food and beverage up? Recost your best sellers against this month's invoices, check vendor prices line by line, and check portions. How to reduce food cost in a restaurant has the steps with the math.
  2. Labor up? Check overtime, schedule to forecasted demand by daypart (breakfast, lunch, dinner), and look for shifts staffed out of habit. How to reduce labor cost in a restaurant covers each lever, including what not to cut.
  3. Sales down? Prime cost is a percentage, so a slow week raises it even if spending held. Read the dollar figure next to the percentage.

If it's well under, check that the inputs are complete before you celebrate. The usual gaps are payroll taxes and benefits, salaried managers, an owner working unpaid shifts, or purchases counted without an inventory count.

Limits of this estimate

The result is only as accurate as what you enter, and it covers only food, beverage and labor. It doesn't:

  • Adjust for your concept. It offers two ranges, full service and quick service. Fine dining, bar-heavy and other concepts run differently.
  • Include other costs. Rent, utilities, card fees, delivery commission, marketing and repairs come out of what's left.
  • Separate food from beverage. Alcohol usually runs at a different margin, so track beverage cost on its own as well.
  • Value owner time. If an owner works shifts without a salary, add a market wage for those hours so periods and locations compare fairly.
  • Forecast. It describes a period that has already happened.

Kutlerri.ai's Prime Cost Optimization Agent, in beta, tracks food and labor cost week to week and flags vendor price increases.

FAQ

How do you calculate prime cost?

Add cost of goods sold, the food and beverage you used in the period, to total labor cost, including payroll taxes and benefits. Divide by total sales for the same period and multiply by 100 for the percentage. Use the same week or month for all three numbers.

What is a good prime cost percentage?

Restaurant365 puts full-service restaurants at 60 to 65% of sales and quick-service restaurants at 55 to 60%. The National Restaurant Association's 2025 data put the median limited-service operator at 65 cents per sales dollar. Use the ranges as a check and judge yourself mainly against your own trend.

What prime cost target should I set?

Start from your own best recent periods rather than an industry range, since concept, menu and service style move the number. Enter that target in the calculator to see the dollar gap each period. Once you're hitting it consistently, move it a point at a time.

How often should I calculate prime cost?

Weekly if you can, with labor checked against sales daily and a full inventory count at least once a month. A weekly figure built on a count of high-cost items only is an estimate, so reconcile it with the monthly full count. A weekly number lets you change next week's schedule and order; a monthly one only tells you what already happened.

Sources

  1. Restaurant365, How to Calculate Restaurant Prime Cost (accessed October 8, 2026)
  2. National Restaurant Association, New Resource from National Restaurant Association Provides Insights into Operational Realities (accessed October 8, 2026)
  3. Internal Revenue Service, Topic no. 751, Social Security and Medicare withholding rates (accessed October 8, 2026)