Food Cost Calculator: Food Cost Percentage and Plate Cost
Two tabs: food cost percentage for a week or month, with the gap to your own target, and the cost of one plate with the price that hits it. Formulas and limits below.
This food cost calculator works two ways. The first tab finds your food cost percentage for a week or month: the cost of the food you used, divided by food sales for the same period. The second costs one plate, ingredient by ingredient, and gives the menu price that hits your target. It's part of our guide to reducing restaurant costs.
Food cost percentage for a period
Formula: Food cost % = cost of food used during the period ÷ food sales for the same period × 100.
Food used isn't food bought: some purchases are still on the shelf at the end, and some of what you cooked was bought last period. So the calculator adjusts purchases for inventory: cost of food used = beginning inventory + purchases − ending inventory. If inventory rose during the period, food used is less than purchases; if it fell, food used is more.
| Input | What it means | Where to find your number |
|---|---|---|
| Beginning food inventory | The value of food on hand at the start of the period, at cost | Last period's ending count |
| Food purchases in the period | Food invoices received in the period, net of vendor credits and returns | Your invoices or accounts payable report |
| Ending food inventory | The value of food on hand at the end, at cost | This period's count, taken at the same point each time, before deliveries arrive |
| Food sales in the period | Food sales only, without beverages, for the same dates | Your POS sales report by category |
| Your target food cost (optional) | Your own goal for the period | Your budget or your best recent periods |
Keep the category and the dates consistent. Count the same categories at the start and end, and match purchases and sales to the same dates. Keep beer, wine, spirits and soft drinks out of inventory, purchases and sales, and give them a beverage cost of their own, or a profitable bar can hide a kitchen problem. Log staff meals and comps separately so they don't look like waste.
Weekly counts of high-value items give an estimate. Counting proteins, cheese and seafood every week is useful, but pairing a partial count with all of the week's purchases doesn't give actual food cost. For a weekly estimate, run the formula on the counted items, and for everything you didn't count, use that week's purchases as the cost of food used, which assumes those stock levels didn't change. Label the result an estimate and reconcile it with a full count at least monthly: if the month's full-count figure differs from the sum of the weekly estimates, the uncounted stock moved.
When the inputs can't be right, the result waits. If ending inventory is higher than beginning inventory plus purchases, food used would be negative, so the calculator shows no percentage. It asks you to check the counts and look for invoices missing from purchases. A blank or negative field, or food sales of zero, is highlighted with a note, and the result stays hidden until you fix it.
Worked example: The period tab opens with $8,000 of beginning inventory, $26,000 of purchases, $7,500 of ending inventory and $85,000 of food sales, with no target. Cost of food used = $8,000 + $26,000 − $7,500 = $26,500. Food cost = $26,500 ÷ $85,000 × 100 = 31.2%, within Restaurant365's 28 to 33% range, which the calculator shows. Gross profit on food = $85,000 − $26,500 = $58,500.
Your own target. Enter one and the gross profit line becomes the dollar gap for the period. In the same example, a 30% target is $85,000 × 30% = $25,500 of food on these sales, so the period is $26,500 − $25,500 = $1,000 over target.
Cost of one plate
Enter each ingredient and its cost in one portion: the quantity on the plate times its cost per unit. Add or remove rows to match the recipe, then enter the menu price and your target food cost percentage.
Cost each ingredient at its usable cost after trimming and cooking, not at the invoice price. A protein that loses a third of its weight in trim costs half again as much per usable pound as the invoice says. The yield test in how to reduce food cost in a restaurant shows how to measure it.
A row with an ingredient name but no cost is flagged, not counted as $0, because a missing cost would understate the plate. Add the cost or remove the row. Empty rows are ignored.
Formula: Plate cost = the sum of every ingredient's cost in the portion. Plate food cost % = plate cost ÷ menu price × 100. Price at your target = plate cost ÷ target food cost %.
Worked example: The plate tab opens with protein at $3.20, starch at $0.60, vegetables at $0.90 and sauce and garnish at $0.45, an $18.00 menu price and a 30% target. Plate cost = $3.20 + $0.60 + $0.90 + $0.45 = $5.15. Plate food cost = $5.15 ÷ $18.00 × 100 = 28.6%. Price at a 30% target = $5.15 ÷ 0.30 = $17.17, below the $18.00 menu price, so the dish is already under target and leaves $12.85 a plate before labor and overhead.
How to read the result
Benchmarks, and what they divide by. Restaurant365's food cost guide says most restaurants aim for 28 to 33%, with quick-service concepts often lower and fine dining higher. Its guide to reducing food cost puts pizza concepts at 18 to 22% and says fine dining can exceed 40%. The National Restaurant Association reported medians of 32.0% for full-service and 32.4% for limited-service operators in 2024, but those divide food and non-alcoholic beverage cost by total sales, so they aren't the same ratio as this calculator's. Your own target and trend matter more than any range.
If the period result is high, compare it with what your plates say it should be. Theoretical food cost is each dish's plate cost times the number sold, added up across the menu and divided by food sales. The gap between that and the period figure is food that left without a sale, or a counting error. Rule out the count and missing invoices before you look for over-portioning, waste or theft; reducing food waste in a restaurant shows how to find where it goes.
If the period result is low, check the count first. An ending inventory counted high, a missing invoice or beverage revenue in food sales makes this period look better than it was.
Read plates in dollars as well as percent. A steak at a higher food cost can leave more money per plate than a pasta at a low one. If the price at your target is above the menu price, the dish is under-priced or over-portioned.
Limits of this estimate
The calculator does the arithmetic on what you enter. It doesn't:
- Check your count. The period result is only as good as the inventory values and invoices behind it, and a partial count is an estimate.
- Allow for yield or waste on the plate tab unless you build them into each ingredient's cost.
- Include labor. The prime cost calculator adds it, and what prime cost is explains why that's the number to manage weekly.
Plate costs go stale every time an invoice price moves. Kutlerri.ai's Prime Cost Optimization Agent, in beta, tracks food and labor cost and flags vendor price increases.
FAQ
How do you calculate food cost percentage?
Divide the cost of food used during the period by food sales for the same period and multiply by 100. Food used is beginning inventory plus purchases minus ending inventory. For example, $8,000 + $26,000 − $7,500 = $26,500 of food used, and $26,500 ÷ $85,000 is 31.2%.
Why not just divide food purchases by food sales?
Because purchases and food used differ whenever inventory changes. A big delivery on the last day of the month raises purchases without any of it being cooked, which makes this month look worse and next month better. Adjusting for beginning and ending inventory removes that swing.
Should beverages be included in food cost?
No. Food cost divides the cost of food used by food sales, so keep beer, wine, spirits and soft drinks out of inventory, purchases and sales. Track them as a separate beverage cost, or a profitable bar can hide a kitchen problem. Prime cost brings food, beverage and labor back together.
How often should I calculate food cost?
Weekly if you can, with a full inventory count at least once a month. A weekly figure built on a count of high-cost items only is an estimate, so reconcile it with the full count. Use the same categories and dates every time so periods compare fairly.
Sources
- Restaurant365, Food Cost Guide: Formula, Benchmarks & How R365 Helps (accessed October 8, 2026)
- Restaurant365, How to Reduce Food Cost Percentage In Restaurants (accessed October 8, 2026)
- National Restaurant Association, Restaurant operators kept food cost ratios in check in 2024 (accessed October 8, 2026)
